Features :
Din sized enclosure for Track (Din rail) / Screw mounting.
Front terminal protective cover for safety.
LED indication for timing in progress.
A1DA :External (zero volt / potential free) command contact for timing
Features :
Din sized enclosure for Track (Din rail) / Screw mounting.
B1DCA-T : HOLD / RESTART facility during power fail conditions.
B1DCA-T : Auto / Manual switch for mode of operation
B1DCA-T : Program - enable / disable facility for tamper
Features :
Slim and Compact design
Suitable for Din Rail Mounting
Finger guard protection.
LED indication for timing in progress
Dimensions : Over-All 22.5 x 75 x 102 mm (W X H X D)Applications : Automation Panels, HT / LT Panels, MCC Panels, C
Features :
Slim and Compact design
Suitable for Din Rail Mounting
Finger guard protection
LED indication for timing in progress
Dimensions : 17.5 x 89.0x 62.0mm (W x H x D)Applications : Automation Panels, HT / LT Panels, MCC Panels, C & R
Features :
Slim and Compact design
Suitable for Din Rail Mounting
Finger guard protection
LED indication for timing in progress
Dimensions : 17.5 x 89.0x 62.0mm (W x H x D)Applications : Automation Panels, HT / LT Panels, MCC Panels, C & R
Features :
Din Sized enclosure for panel mounting.
Digital dual display for set value and process value.
FUNCTION (programmable): ON DELAY / INTERVAL /CYCLIC ADJUSTABLE.
TYPE OF START SIGNAL (programable) : NO START / PULSE / CONTINUOUS.
One of the
Features :
Suitable for screw mounting(except ST4-M1).
7 segment display indication for channel and timing operation (except ST-4M1).
User friendly programming for ON/OFF time selection independently (except ST-4M1).
Hold /Restart feature is
Features :
LED indication for timing in progress
Front protective cover for safety.
Timer and base available for Track(except H3D1).
Large transparent knob with lock is provided for precise time setting and protect from unintentional change of time
Features :
High brightness red LED display
On site programmable CT(pri &sec) ratio
Protection from dust and water as per IP-51 for front facia
Measurement of basic parameters
Program enable /disable facility available
EMS-11: Measurement of
Features :
Micro Controller based 3 Channel DC Energy Meter
Displays DC parameters V, I, KW, KWh ,MWh& Load on hours of all three channels.
Displays the latest reading of all the cleared energies and load on hours.
Display Hold / Scroll
Features :
Microcontroller based multifunction AC Energy Meter.
Accuracy Class1.0 / (Class 0.5 calibration on Request).
CT /PT (Pri/Sec) Programmable.
Digital Measurement.
IEC 62052-11 IEC 62053-21 IEC 62053-22 IEC 62053-23.
RS 485 Serial Port with
Features :
Measurement of basic, power, energy and demand parameters.
On-site programmable PT and CT ratios.
High brightness LED display (alpha numeric for parameter, numeric for value).
Automatic CT reverse correction for energy and
Features :
31/2 digit, 7segment LED temperature display
Wide voltage range (85-270V AC / DC)
Universal input (J / K / PT-100)
LED indication for sensor, funtion & relay status.
Sensor and function lock.
Dual function (On / Off or Self
Features :
Universal Input (J,K,PT-100) Selectable.
Wide Voltage Range.
ON / OFF or Self-Tuned Function Selectable.
Single / double set point.
Over Voltage Protection
LED Indication for sensor selected, function and relay status
Program enable /
Features :
Battery operated (2nos x 1.5V DC, AA size) Real Time Clock in 24 hour format.
Switches On and Off 4 times in a day with respect to real time
Dimensions : 110 X 86 X 68mm Applications : ATM air
Features :
This is a light switch working on direct or reflective transmission principle.
It consists of high intensity emitter source and high sensitive receiver
The signal received from the receiver will operate a relay with ON delay or OFF delay
Features :
Designed for the control of cotton level in laminae duct in ERM cleaners.
Designed for Industrial Environment
High Intensity pulsed Infra Red Emitter
Time Delay up to 20 Seconds.
Highly immune to Ambient Light
45mm Din Rail
Features :
Compact, light weight and SMPS design
Versatile and easy snap-on mounting on Din-rail
Very low ripple and noise
Regulated and adjusted output
Protection against over voltage, short circuit and over load.
Dimensions :
Overall : MS-01 -
Features :
Micro-controller based design with world class Indian software.
Non-contact sensing through reflected light beam on reflective sticker.
LCD display
Input sensing indication through LED.
Memory facility to retain measured value.
Portable,
Features :
Din sized enclosure for panel mounting.
Wide Voltage range
Front / Rear reset facility provided.
Hold / Restart options (selectable) during power failure.
Input signal from proximity switch ( NPN / PNP type) or Potential free (zero volt)
Features :
Switches On and Off 4 times in a day with respect to real time.
LED indication for relay status, LCD display for real time clock.
User friendly programming with manual over ride facility.
Clock hour and Clock minute buttons can be